- Dissertations, fiches de lectures, exemples du BAC


TD : AIR TRANSPORT. Recherche parmi 229 000+ dissertations

Par   •  8 Février 2019  •  TD  •  4 547 Mots (19 Pages)  •  155 Vues

Page 1 sur 19



  1. History
  2. Air transport agreement
  1. Cargo transportation operations
  2. Passengers transportation





Air transport refers to the activity of transportation of passengers or freight as well as the economic sector comprising all the main activities or annexes concerning this transportation way.

In 2016, 150 million passengers (+ 11% since 2011) and 2.5 million tons of freight are transported to France.

Air transport is mainly carried out by airlines operating airliners, more rarely helicopters or even airships, between airports constituting a network of destinations.

At the regulatory level, air transport is one of three classes of aviation activity subject to specific regulations and companies receive a certificate of operation or a license issued by their governing government authority. Military activities and general aviation are subject to other regulations.

We will focus on commercial air transport for our work. What is the importance of commercial air transport in the world?

We will show in the following lines the fruit of our researches about this so advantageous transportation way.

  1. Presentation
  1. History

   Air transport begins really with Wright brothers. Using a methodological approach and concentrating on the controllability of the aircraft, the brothers built and tested a series of kite and glider designs from 1900 to 1902 before attempting to build a powered design. The gliders worked, but not as well as the Wrights had expected based on the experiments and writings of their 19th-century predecessors. Their first glider, launched in 1900, had only about half the lift they anticipated. Their second glider, built the following year, performed even more poorly. Rather than giving up, the Wrights constructed their own wind tunnel and created a number of sophisticated devices to measure lift and drag on the 200 wing designs they tested. As a result, the Wrights corrected earlier mistakes in calculations regarding drag and lift. Their testing and calculating produced a third glider with a higher aspect ratio and true three-axis control. They flew it successfully hundreds of times in 1902, and it performed far better than the previous models. By using a rigorous system of experimentation, involving wind-tunnel testing of air foils and flight testing of full-size prototypes, the Wrights not only built a working aircraft, the Wright Flyer, but also helped advance the science of aeronautical engineering.

The Wright Flyer: the first sustained flight with a powered, controlled aircraft.

The Wrights appear to be the first to make serious studied attempts to simultaneously solve the power and control problems. Both problems proved difficult, but they never lost interest. They solved the control problem by inventing wing warping for roll control, combined with simultaneous yaw control with a steerable rear rudder. Almost as an afterthought, they designed and built a low-powered internal combustion engine. They also designed and carved wooden propellers that were more efficient than any before, enabling them to gain adequate performance from their low engine power. Although wing-warping as a means of lateral control was used only briefly during the early history of aviation, the principle of combining lateral control in combination with a rudder was a key advance in aircraft control. While many aviation pioneers appeared to leave safety largely to chance, the Wrights' design was greatly influenced by the need to teach themselves to fly without unreasonable risk to life and limb, by surviving crashes. This emphasis, as well as low engine power, was the reason for low flying speed and for taking off in a head wind. Performance, rather than safety, was the reason for the rear-heavy design, because the canard could not be highly loaded.

According to the Smithsonian Institution and Fédération Aéronautique Internationale (FAI), the Wrights made the first sustained, controlled, powered heavier-than-air manned flight at Kill Devil Hills, North Carolina, four miles (8 km) south of Kitty Hawk, North Carolina on December 17, 1903.

The first flight by Orville Wright, of 120 feet (37 m) in 12 seconds, was recorded in a famous photograph. In the fourth flight of the same day, Wilbur Wright flew 852 feet (260 m) in 59 seconds. The flights were witnessed by three coastal lifesaving crewmen, a local businessman, and a boy from the village, making these the first public flights and the first well-documented ones.

Orville described the final flight of the day: "The first few hundred feet were up and down, as before, but by the time three hundred feet had been covered, the machine was under much better control. The course for the next four or five hundred feet had but little undulation. However, when out about eight hundred feet the machine began pitching again, and, in one of its darts downward, struck the ground. The distance over the ground was measured to be 852 feet (260 m); the time of the flight was 59 seconds. The frame supporting the front rudder was badly broken, but the main part of the machine was not injured at all. We estimated that the machine could be put in condition for flight again in about a day or two. They flew only about ten feet above the ground as a safety precaution, so they had little room to maneuver, and all four flights in the gusty winds ended in a bumpy and unintended "landing". Modern analysis by Professor Fred E. C. Culick and Henry R. Rex (1985) has demonstrated that the 1903 Wright Flyer was so unstable as to be almost unmanageable by anyone but the Wrights, who had trained themselves in the 1902 glider. The Wrights continued flying at Huffman Prairie near Dayton, Ohio in 1904–05. In May 1904 they introduced the Flyer II, a heavier and improved version of the original Flyer. On June 23, 1905 they first flew a third machine, the Flyer III. After a severe crash on 14 July 1905, they rebuilt the Flyer III and made important design changes. They almost doubled the size of the elevator and rudder and moved them about twice the distance from the wings. They added two fixed vertical vanes (called "blinkers") between the elevators, and gave the wings a very slight dihedral. They disconnected the rudder from the wing-warping control, and as in all future aircraft, placed it on a separate control handle. When flights resumed the results were immediate. The serious pitch instability that hampered Flyers I and II was significantly reduced, so repeated minor crashes were eliminated. Flights with the redesigned Flyer III started lasting over 10 minutes, then 20, then 30. Flyer III became the first practical aircraft (though without wheels and needing a launching device), flying consistently under full control and bringing its pilot back to the starting point safely and landing without damage. On 5 October 1905, Wilbur flew 24 miles (39 km) in 39 minutes 23 seconds.


Télécharger au format  txt (29.6 Kb)   pdf (1.3 Mb)   docx (1.2 Mb)  
Voir 18 pages de plus »
Uniquement disponible sur